Contents
Checking the Powerpath License
#powermt check_registration
[root@mls-rac01 etc]# emcpreg -install
EMC PowerPath Registration
Do you have a new registration key or keys to enter?[n] y Enter the registration keys(s) for your product(s), one per line, pressing Enter after each key. After typing all keys, press Enter again.
Key (Enter if done): BQPI-OB4E-GFCA-Q7SW-MQ9B-Z76J 1 key(s) successfully added. Key successfully installed.
Key (Enter if done): 1 key(s) successfully registered. [root@mls-rac01 etc]# powermt check_registration
Key BQPI-OB4E-GFCA-Q7SW-MQ9B-Z76J Product: PowerPath Capabilities: All
How to check the list of licensed enablers on a CLARiiON Array using Unisphere
following these steps:
- Access the Array using either Unisphere Server Software or by typing the SP IP address in your browser.
Click the Home icon located on the top left corner of the page.
- From the list of the available arrays, Right click the Storage Array, whose licenses need to be checked and select Properties. Alternatively, from the list of available arrays, you can click the Storage Array whose licenses need to be checked and then click the Properties button, which is displayed on the right side of the resulting page.
- Click the Software tab . The software tab lists all installed licenses\enablers available on the array.
mds9124_passwordRecovery_howto
关闭所有连接该光交的应用服务。
1. 通过串口线连接至EMC MDS9124管理口，打开HyperTerminal/Minicom程序，设置连接如下 ==
Bits per second: 9600 Data bits: 8 Parity: None Stop bits: 1 Flow control: None (注：如果是MDS9500系列则把Bits设置为38400)
2. 由于密码已忘记，手动按电源重启EMC光纤交换机。
3. 交换机重启进入SANOS时，按住Ctrl+]键使交换机进入到boot模式
switch(boot)#
4. 切换到配制模式，并更改密码。
switch(boot)# configure terminal switch(bootconfig)# adminpassword PASSWORD switch(bootconfig)# exit
5. 加载启动映像进入正常模式。 switch(boot)# load bootflash:SANIOS.img
6. 保存配制信息即完成，登录使用新密码测试。 switch# copy runningconfig startupconfig
最后：应用服务器主机重新扫描磁盘，识别正常后，开启相应服务即可。
cfgmgr -v lsdev -Ccdisk
How to login for fist time?
What is default user and pass for first log on VNX
community.emc.com/thread/123122?tstart=0
Default login/password for EMC VNX Unified system is: * login: sysadmin * password: sysadmin Or for VNXe: * login: admin * password: Password123#
Also here are some default passwords you can try: nasadmin/nasadmin emcadmin/emcadmin admin/Password123# service/service sysadmin/sysadmin temp/temp
VNX File simulator
- nasadmin / nasadmin
http://my-virt.alfadir.net/2012/06/part-2-configuring-vnx-control-station-simulator/
http://techhead.co/emc-vnx-simulator-vsahow-to-download-the-latest-version/
https://support.emc.com/search?text=VNX%20File%20simulator&searchLang=en_US&facetProductId=15469