Contents
-
Netbakcup how to
- How to prepare for NetBackup Master/Media Server upgrade
- restart netbackup appliacne services
- upgrade HP MSL6400 firmware
- List Configured Tape driver and robots
- List devices
- 确认Devices Unit
- 确认Media Unit
- List all media
- 确认license
- 检查设备配置
- 授予 NetBackup 对 NAS (NDMP) 主机的访问权限
- UNIX/Linux Administration Console
- Troubleshooting
Netbakcup how to
How to prepare for NetBackup Master/Media Server upgrade
The high level order of upgrade steps
This is a very high level of NetBackup upgrade steps:
http://www.settlersoman.com/how-to-upgrade-netbackup-mastermedia-server/
restart netbackup appliacne services
netbackup stop netbackup show netbackup start
,if above not gracefull stop,then try following command
bp.kill_all
upgrade HP MSL6400 firmware
- DOWN Driver
升级HP微码,备份配制文件->执行升级。
- appliance重新扫描SCSI设备
lsscisi -g
scan -changer
tpautoconf -r
tpautoconf -t重新走一遍"添加磁带库"配制向导。
# stop ps -ef | grep bprd bprdreq -teminate # netbackup start
List Configured Tape driver and robots
tpconfig -d
List devices
scan tpautoconf -t tpautoconf -r
确认Devices Unit
vmoprcmd
确认Media Unit
bpstulist
List all media
- vmquery -a -b nbemmcmd -listmedia -allrecords -brief
确认license
/usr/openv/netbackup/bin/admincmd/get_license_key
检查设备配置
/usr/openv/volmgr/bin/vmd 491954762 9200
- 验证 ltid 、 vmd 、 avrd 和所需的任何机械手后台驻留程序是否处于活动状 态。
授予 NetBackup 对 NAS (NDMP) 主机的访问权限
NetBackup 必须具有对 NAS（或 NDMP）主机的访问权限，然后才能使用 NDMP
授予 NetBackup 对 NDMP 主机的访问权限 1 在 NetBackup 服务器上的 NetBackup 管理控制台中，展开“介质和设备管 理”>“凭据”>“NDMP 主机”。 2 在“操作”菜单下，选择“新建”>“新建 NDMP 主机”。 3 在“添加 NDMP 主机”对话框中，输入 NetBackup 要备份的 NDMP 服务器的名称
UNIX/Linux Administration Console
/usr/openv/java/jnbSA &
Troubleshooting
Recall Trash
Image过期产生了垃圾 检查消重存储池队列(TLOG文件) ls -l /disk/queue/ 执行队列处理 /usr/openv/pdde/pdcr/bin/crcontrol --processqueue 监控队列处理 tail -f /disk/log/spoold/storaged.log 垃圾回收 /usr/openv/pdde/pdcr/bin/crcollect -v -m +1,+2 重复2-5步骤直至TLOG处理完 检查Used和Space available within containers的空间 /usr/openv/pdde/pdcr/bin/crcontrol --dsstat 如果Space needs compaction的值很高，则执行压缩 /usr/openv/pdde/pdcr/bin/crcontrol --compactstart
Running NBSU
nbsu nbsu -l -nozip
View processes
# Acitive processes bpps -a bpps -x # only Media Manager vmps
Show Error
bperror -all -U bperror -backstat -U bperror -problems -U bperror -media -U bperror -disk
Restore must be resumed prior to first image expiration
http://www.symantec.com/connect/forums/restore-must-be-resumed-prior-first-image-expiration
An error occurred during the installation of assembly
MSI (s) (90:2C) [13:59:03:465]: Product: Symantec NetBackup Client -- Error 1935.An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="win32",version="8.0.50727.762",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64"'. Please refer to Help and Support for more information. HRESULT: 0x80070005. assembly interface: IAssemblyCache, function: CreateAssemblyCacheItem, component: {844EFBA7-1C24-93B2-A01F-C8B3B9A1E18E}
Cause
This error has been observed when the insufficient permissions exist on this folder: C:\Windows\winsxs\InstallTemp
The minimum needed (and default) permissions are: Read & execute List folder contents Read Write Special permissions
Solution
The user logged in performing the install must have the above permissions for the folder C:\Windows\winsxs\InstallTemp.
verify media/TAPE
Please paste output from nbemmcmd -listmedia -mediaid ID -verbose