Differences between revisions 39 and 41 (spanning 2 versions)
⇤ ← Revision 39 as of 2017-01-17 02:20:11 →
Size: 16577
Editor: merlyn
Comment:
← Revision 41 as of 2017-01-18 04:38:06 → ⇥
Size: 17274
Editor: localhost
Comment:
Deletions are marked like this. Additions are marked like this.
Line 29: Line 29:
To manually stop NetBackup processes on NetBackup Appliance 5220, complete the following steps:

  i.Open an SSH session and log on to the NetBackup Appliance 5220. The logon is admin and the default password is P@ssw0rd.
    i.Switch to Main_Menu > Support > Processes > and run the command 'NetBackup Stop'.
    i.Run the command 'NetBackup Show' to check if all NetBackup processes have been stopped.

To manually start NetBackup processes on NetBackup Appliance 5220 after loggin on as admin via SSH,

  i.Switch to Main_Menu > Support > Processes > and run the command 'NetBackup Start'.
  i.Run the command 'NetBackup Show' to check all NetBackup processes that have been started.

Contents

  1. Netbakcup how to
    1. How to prepare for NetBackup Master/Media Server upgrade
      1. There are some standard steps which you should do
    2. restart netbackup appliacne services
    3. upgrade HP MSL6400 firmware
    4. List Configured Tape driver and robots
    5. List devices
    6. 确认Devices Unit
    7. 确认Media Unit
    8. List all media
    9. 确认license
    10. 检查设备配置
    11. 授予 NetBackup 对 NAS (NDMP) 主机的访问权限
    12. UNIX/Linux Administration Console
    13. How does NetBackup for SQL Server back up a database?
  2. Troubleshooting
    1. Error bptm media manager terminated by parent process
      1. Waiting in NetBackup schedule work queue on server
    2. Trace the network issue
    3. status 2074 disk volume is down
    4. Recall Trash
    5. Running NBSU
    6. View processes
    7. Show Error
    8. Restore must be resumed prior to first image expiration
    9. An error occurred during the installation of assembly
      1. Cause
      2. Solution
    10. verify media/TAPE

Netbakcup how to

How to prepare for NetBackup Master/Media Server upgrade

The high level order of upgrade steps

This is a very high level of NetBackup upgrade steps:

  1. Upgrade NetBackup OpsCenter (if exists).

  2. Upgrade NetBackup Master Server.

  3. Upgrade NetBackup Media Server(s).

  4. Upgrade NetBackup Clients.

There are some standard steps which you should do

  1. Check hardware compatibility
  2. Check Operation System compatibility
  3. Before starting upgrading to the new version, run a Catalog Backup.

  4. Depending on NetBackup Catalog Size, the upgrade from 7.1 to 7.5 would need much time.

  5. Read Release Notes and following steps mentioned in the Upgrade Guide.

https://www.veritas.com/support/en_US/article.TECH74584

https://sort.veritas.com/checklist/install#report

http://www.settlersoman.com/how-to-upgrade-netbackup-mastermedia-server/

restart netbackup appliacne services

To manually stop NetBackup processes on NetBackup Appliance 5220, complete the following steps:

  • i.Open an SSH session and log on to the NetBackup Appliance 5220. The logon is admin and the default password is P@ssw0rd.

    • i.Switch to Main_Menu > Support > Processes > and run the command 'NetBackup Stop'. i.Run the command 'NetBackup Show' to check if all NetBackup processes have been stopped.

To manually start NetBackup processes on NetBackup Appliance 5220 after loggin on as admin via SSH,

  • i.Switch to Main_Menu > Support > Processes > and run the command 'NetBackup Start'. i.Run the command 'NetBackup Show' to check all NetBackup processes that have been started. 

netbackup stop
netbackup show 
netbackup start

,if above not gracefull stop,then try following command 

bp.kill_all

upgrade HP MSL6400 firmware

  1. DOWN Driver

  2. 升级HP微码,备份配制文件->执行升级。

  3. appliance重新扫描SCSI设备 

 lsscisi -g 
 scan -changer
            
 tpautoconf -r
 tpautoconf -t

重新走一遍"添加磁带库"配制向导。 

# stop
ps -ef | grep bprd
bprdreq -teminate

# netbackup start

List Configured Tape driver and robots

tpconfig -d

List devices

scan
tpautoconf -t
tpautoconf -r

确认Devices Unit

vmoprcmd

确认Media Unit

bpstulist

List all media

  • vmquery -a -b nbemmcmd -listmedia -allrecords -brief

确认license

/usr/openv/netbackup/bin/admincmd/get_license_key

检查设备配置

 /usr/openv/volmgr/bin/vmd
 491954762
 9200
  • 验证 ltid 、 vmd 、 avrd 和所需的任何机械手后台驻留程序是否处于活动状 态。

授予 NetBackup 对 NAS (NDMP) 主机的访问权限

NetBackup 必须具有对 NAS（或 NDMP）主机的访问权限，然后才能使用 NDMP 

授予 NetBackup 对 NDMP 主机的访问权限
1 在 NetBackup 服务器上的 NetBackup 管理控制台中，展开“介质和设备管
理”>“凭据”>“NDMP 主机”。
2 在“操作”菜单下，选择“新建”>“新建 NDMP 主机”。
3 在“添加 NDMP 主机”对话框中，输入 NetBackup 要备份的 NDMP 服务器的名称

UNIX/Linux Administration Console

/usr/openv/java/jnbSA &

How does NetBackup for SQL Server back up a database?

From the NetBackup Microsoft SQL Client you can select the databases or the database components that you want to back up. When you select an object for backup, the GUI creates a batch file that contains a script. The SQL Server database agent interprets this script. You can either execute the script immediately or save it to run later. You can run a script later by including it in the backup selections list of a backup policy. 

When a backup script is executed, NetBackup for SQL Server does the following:
generates an SQL backup statement, logs into SQL Server, and delivers the SQL
statement to SQL Server through ODBC. Next, the database agent connects to
SQL Server through one or more VDI objects. One virtual device is created per
backup stripe. In addition, a VxBSA session is initiated for each stripe. These
separate sessions allow NetBackup to start a backup job for each stream that is
generated from SQL Server.

When the backup completes, the database agent obtains detailed properties of the
object that was backed up, including its relationships to other objects. The agent
writes this information to the NetBackup catalog and associates it with the backup
image. If there are multiple stripes, then the metadata is associated with the first
backup image. The adjunct stripes are associated with one another based upon a
common naming convention.

Troubleshooting

Error bptm media manager terminated by parent process

http://kmit4u.blogspot.com/2010/07/netbackup-ms-sql-backup-client-hold.html 

2017-1-11 14:18:22 - Info nbjm (pid=63136) starting backup job (jobid=328596) for client server007.meizu.com, policy server007_mssql_log_8h_1m, schedule Log-Application-Backup
2017-1-11 14:18:22 - Info nbjm (pid=63136) requesting STANDARD_RESOURCE resources from RB for backup job (jobid=328596, request id:{C0AD3716-D7C5-11E6-AA1A-E0AA1A227C83})
2017-1-11 14:18:22 - requesting resource stu_disk_it-nbu-01
2017-1-11 14:18:22 - requesting resource it-nbu-01.NBU_CLIENT.MAXJOBS.server007.meizu.com
2017-1-11 14:18:22 - requesting resource it-nbu-01.NBU_POLICY.MAXJOBS.server007_mssql_log_8h_1m
2017-1-11 14:18:22 - awaiting resource stu_disk_it-nbu-01. Maximum job count has been reached for the storage unit.
2017-1-11 14:20:22 - Info nbjm (pid=63136) Waiting in NetBackup scheduler work queue on server it-nbu-01
2017-1-11 14:22:22 - Info nbjm (pid=63136) Waiting in NetBackup scheduler work queue on server it-nbu-01
2017-1-11 14:24:22 - Info nbjm (pid=63136) Waiting in NetBackup scheduler work queue on server it-nbu-01
2017-1-11 14:24:45 - Info bpbrm (pid=109201) server007.meizu.com is the host to backup data from
2017-1-11 14:24:45 - Info bpbrm (pid=109201) reading file list for client
2017-1-11 14:24:45 - granted resource  it-nbu-01.NBU_CLIENT.MAXJOBS.server007.meizu.com
2017-1-11 14:24:45 - granted resource  it-nbu-01.NBU_POLICY.MAXJOBS.server007_mssql_log_8h_1m
2017-1-11 14:24:45 - granted resource  MediaID=@aaaaf;DiskVolume=PureDiskVolume;DiskPool=dp_disk_it-nbu-01;Path=PureDiskVolume;StorageServer=it-nbu-01;MediaServer=it-nbu-01
2017-1-11 14:24:45 - granted resource  stu_disk_it-nbu-01
2017-1-11 14:24:45 - estimated 0 kbytes needed
2017-1-11 14:24:45 - Info nbjm (pid=63136) started backup (backupid=server007.meizu.com_1484115885) job for client server007.meizu.com, policy server007_mssql_log_8h_1m, schedule Log-Application-Backup on storage unit stu_disk_it-nbu-01
2017-1-11 14:24:45 - started process bpbrm (pid=109201)
2017-1-11 14:24:45 - connecting
2017-1-11 14:24:46 - Info bpbrm (pid=109201) listening for client connection
2017-1-11 14:24:47 - Info bpbrm (pid=109201) INF - Client read timeout = 7200
2017-1-11 14:24:48 - Info bpbrm (pid=109201) accepted connection from client
2017-1-11 14:24:48 - Info dbclient (pid=1680) Backup started
2017-1-11 14:24:48 - Info bpbrm (pid=109201) bptm pid: 109203
2017-1-11 14:24:48 - Info bptm (pid=109203) start
2017-1-11 14:24:48 - Info bptm (pid=109203) using 1048576 data buffer size
2017-1-11 14:24:48 - connected; connect time: 0:00:00
2017-1-11 14:24:49 - Info bptm (pid=109203) using 64 data buffers
2017-1-11 14:24:49 - Info bptm (pid=109203) start backup
2017-1-11 14:54:52 - Info dbclient (pid=1680) done. status: 6

2017-1-11 15:34:56 - Info bptm (pid=109203) backup child process is pid 131564
2017-1-11 15:34:56 - begin writing
2017-1-11 15:34:58 - Error bptm (pid=109203) media manager terminated by parent process
2017-1-11 15:35:00 - Info it-nbu-01 (pid=109203) StorageServer=PureDisk:it-nbu-01; Report=PDDO Stats for (it-nbu-01): scanned: 4 KB, CR sent: 0 KB, CR sent over FC: 0 KB, dedup: 100.0%, cache hits: 0 (0.0%)
2017-1-11 15:35:00 - Info dbclient (pid=1680) done. status: 6: the backup failed to back up the requested files
2017-1-11 15:35:00 - end writing; write time: 0:00:04
the backup failed to back up the requested files  (6)

== MSSQL Client log VxBSACreateObject Erroror == 

INF - Created VDI object for SQL Server instance <IT-K3-1-243>. Connection timeout is <300> seconds.
ERR - Error in VxBSACreateObject: 3.
    CONTINUATION: - System detected error, operation aborted.
    ERR - Error in GetCommand: 0x80770004.
        CONTINUATION: - An abort request is preventing anything except termination actions.
        DBMS MSG - ODBC return code <-1>, SQL State <37000>, SQL Message <3202><[Microsoft][ODBC SQL Server Driver][SQL Server]在 "VNBU0-5372-8416-1484093136" 上写入失败: 995(由于线程退出或应用程序请求，已中止 I/O 操作。
        )>.
        DBMS MSG - SQL Message <3271><[Microsoft][ODBC SQL Server Driver][SQL Server]在文件 "VNBU0-5372-8416-1484093136" 上发生不可恢复的 I/O 错误: 995(由于线程退出或应用程序请求，已中止 I/O 操作。)。>
        DBMS MSG - SQL Message <3013><[Microsoft][ODBC SQL Server Driver][SQL Server]BACKUP LOG 正在异常终止。>
        ERR - Error found executing <backup log "AIS20130321213128" to VIRTUAL_DEVICE='VNBU0-5372-8416-1484093136' with  stats = 10, blocksize = 65536, maxtransfersize = 4194304, buffercount = 2>.
        ERR - Internal error. See the dbclient log for more information.
        INF - OPERATION #2 of batch C:\Program Files\Veritas\SQLScripts\log.bch FAILED with STATUS 1 (0 is normal). Elapsed time = 314(314) seconds.
        INF - BACKUP STARTED USING

Waiting in NetBackup schedule work queue on server

13:11:49 INF - Beginning backup on server it-nbu-01 of client IT-K3-1-243.MEIZU.COM
13:11:52.414 [10224.6608] <4> : 13:11:51 INF - Waiting in NetBackup scheduler work queue on server it-nbu-01
13:11:52.414 [10224.6316] <4> : 13:11:51 INF - Waiting in NetBackup scheduler work queue on server it-nbu-01
13:13:52.068 [10224.6608] <4> : 13:13:51 INF - Waiting in NetBackup scheduler work queue on server it-nbu-01
13:13:52.068 [10224.6316] <4> : 13:13:51 INF - Waiting in NetBackup scheduler work queue on server it-nbu-01
13:15:52.737 [10224.6608] <4> : 13:15:52 INF - Waiting in NetBackup scheduler work queue on server it-nbu-01
13:15:52.737 [10224.6316] <4> : 13:15:52 INF - Waiting in NetBackup scheduler work queue on server it-nbu-01
13:17:53.405 [10224.6608] <4> : 13:17:53 INF - Waiting in NetBackup scheduler work queue on server it-nbu-01
13:17:53.405 [10224.6316] <4> : 13:17:52 INF - Waiting in NetBackup scheduler work queue on server it-nbu-01
13:19:42.919 [10224.6608] <4> : 13:19:42 INF - Server status = 2106
ERR - Error in VxBSACreateObject: 3.
13:19:42.919 [10224.6316] <4> : 13:19:42 INF - Server status = 2106
ERR - Error in VxBSACreateObject: 3.
    CONTINUATION: - System detected error, operation aborted.
        CONTINUATION: - System detected error, operation aborted.
        ERR - Error in GetCommand: 0x80770004.
        ERR - Error in GetCommand: 0x80770004.
            CONTINUATION: - An abort request is preventing anything except termination actions.
                CONTINUATION: - An abort request is preventing anything except termination actions.
                DBMS MSG - ODBC return code <-1>, SQL State <37000>, SQL Message <3202><[Microsoft][ODBC SQL Server Driver][SQL Server]在 "VNBU0-10224-4172-1484195146" 上写入失败: 995(由于线程退出或应用程序请求，已中止 I/O 操作
                )>.
                DBMS MSG - SQL Message <3271><[Microsoft][ODBC SQL Server Driver][SQL Server]在文件 "VNBU0-10224-4172-1484195146" 上发生不可恢复的 I/O 错误: 995(由于线程退出或应用程序请求，已中止 I/O 操作。)。>
                DBMS MSG - SQL Message <3013><[Microsoft][ODBC SQL Server Driver][SQL Server]BACKUP DATABASE 正在异常终止。>
                ERR - Error found executing <backup database "AIS20130321213128" to VIRTUAL_DEVICE='VNBU0-10224-4172-1484195146', VIRTUAL_DEVICE='VNBU1-10224-4172-1484195146' with  stats = 10, blocksize = 65536, maxtransfersize 
                = 4194304, buffercount = 4>.

Trace the network issue

run:

from client:
bpclntcmd -pn
bpclntcmd -self
bpclntcmd -hn <master server>
bpclntcmd -hn <media server>
bpclntcmd -ip <master IP>
bpclntcmd -ip <media IP>

from master:
traceroute <client name>
ping -s -i <nic> -p 13782 <client name> 65000 4
bpgetconfig -M <client name> -x
bptestbpcd -client <client name> -verbose

from media:
traceroute <client name>
ping -s -i <nic> -p 13782 <client name> 65000 4
bpgetconfig -M <client name> -x
bptestbpcd -client <client name> -verbose

status 2074 disk volume is down

01/05/2017 19:38:27 - Info it-nbu-01(pid=217530) StorageServer=PureDisk:it-nbu-01; Report=PDDO Stats for (it-nbu-01): scanned: 813 KB, CR sent: 38 KB, CR sent over FC: 0 KB, dedup: 95.3%, cache disabled
01/05/2017 19:38:41 - Info bpdm(pid=217530) EXITING with status 0
01/05/2017 19:38:44 - Info bpdm(pid=44644) started
01/05/2017 19:38:44 - started process bpdm (44644)
01/05/2017 19:38:45 - Error bpdm(pid=44644) NBJM returned an extended error status: Disk volume is down (2074)
01/05/2017 19:38:45 - Error nbreplicate(pid=217494) ReplicationJob::Replicate: Replication failed for backup id IT-INFO-1-238.MEIZU.COM_1483556372: media open error (83)
01/05/2017 19:38:45 - requesting resource @aaaaf
01/05/2017 19:38:45 - Error nbjm(pid=11252) NBU status: 2074\, EMM status: Disk volume is down
01/05/2017 19:38:46 - Info bpdm(pid=44660) started

The option "This directory can exist on the root file system or system disk" need to be checked on the Storage Unit Disk properties.

  1. Run the following commands to query and update the disk pool device status on the netbackup server end. To check the state of the disk pool:

    • nbdevquery -listdp -stype PureDisk -U

      • nbdevquery -liststs -U
        • nbdevquery -listdp -U

          • nbdevquery -listdv -stype <disk pool type> -U

  2. To check the state of the disk volume:

    • nbdevquery -listdv -stype PureDisk -dp <disk Pool name> -dv <disk volume name> -U

      • Note - the disk volume name in the command above was found in the NetBackup Admin Console in the All diskpools selection.

  3. To bring up the disk volume state:

    • ./NetBackup/bin/admincmd/nbdevconfig -changestate -stype PureDisk -dp <Disk Pool name> -dv <disk volume name> -state UP

      • Note - If the above commands do not help for getting the status to update for the diskpool volumes or the diskpool continues to go down in the NetBackup console, recycle the services of netbackup which will update the status as per the high watermark settings at the PureDisk end for the disk volume.

Recall Trash

Image过期产生了垃圾
检查消重存储池队列(TLOG文件)
ls -l /disk/queue/
执行队列处理
/usr/openv/pdde/pdcr/bin/crcontrol --processqueue
监控队列处理
tail -f /disk/log/spoold/storaged.log
垃圾回收
/usr/openv/pdde/pdcr/bin/crcollect -v -m +1,+2
重复2-5步骤直至TLOG处理完
检查Used和Space available within containers的空间
/usr/openv/pdde/pdcr/bin/crcontrol --dsstat
如果Space needs compaction的值很高，则执行压缩
/usr/openv/pdde/pdcr/bin/crcontrol --compactstart

Running NBSU

nbsu
nbsu -l -nozip

View processes

# Acitive processes
bpps -a
bpps -x

# only Media Manager
vmps

Show Error

bperror -all -U 
bperror -backstat -U
bperror -problems -U
bperror -media -U
bperror -disk

Restore must be resumed prior to first image expiration

http://www.symantec.com/connect/forums/restore-must-be-resumed-prior-first-image-expiration

An error occurred during the installation of assembly

MSI (s) (90:2C) [13:59:03:465]: Product: Symantec NetBackup Client -- Error 1935.An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="win32",version="8.0.50727.762",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64"'. Please refer to Help and Support for more information. HRESULT: 0x80070005. assembly interface: IAssemblyCache, function: CreateAssemblyCacheItem, component: {844EFBA7-1C24-93B2-A01F-C8B3B9A1E18E}

Cause

This error has been observed when the insufficient permissions exist on this folder: C:\Windows\winsxs\InstallTemp 

The minimum needed (and default) permissions are:
Read & execute
List folder contents
Read
Write
Special permissions

Solution

The user logged in performing the install must have the above permissions for the folder C:\Windows\winsxs\InstallTemp.

verify media/TAPE

Please paste output from nbemmcmd -listmedia -mediaid ID -verbose

https://vox.veritas.com/t5/NetBackup/how-to-find-out-if-my-tapes-have-images-data-on-them-bulk-search/td-p/336469/page/3

désert/Netbackup (last edited 2019-09-11 02:38:39 by 192)