#acl merlyn:read,write All:read

= Ultrapath how to =
== install UltraPath ==
{{{
sh install.sh

# edit /boo/grub/menu.lst
==> initrd /boot/nxup-2.6.16.60-0.85.1-smp.img
}}}

== check status ==
{{{
[root@gowms-stb ~]# upadmin 

UltraPath CLI #0 >show path
--------------------------------------------------------------------------------------------------------------------------------------
 Path ID   Initiator Port       Array Name       Controller    Target Port     Path State  Check State  Port Type     Port ID     
    0     10000090fae3a864  Huawei.Storage_ST02      0B      20116008101782a0    Normal        --          FC      CTE0.B.IOM0.P1 
    1     10000090fae3a864  Huawei.Storage_ST02      0A      20016008101782a0    Normal        --          FC      CTE0.A.IOM0.P1 
    2     10000090fae3a865  Huawei.Storage_ST02      0B      20106008101782a0    Normal        --          FC      CTE0.B.IOM0.P0 
    3     10000090fae3a865  Huawei.Storage_ST02      0A      20006008101782a0    Normal        --          FC      CTE0.A.IOM0.P0 
--------------------------------------------------------------------------------------------------------------------------------------

UltraPath CLI #1 >check status
------------------------------------------------------------
Checking path status:
Pass
------------------------------------------------------------
Checking environment and config:
Pass
------------------------------------------------------------
Checking HBA Information:
iscsi is not installed.
complete FC checking.
Pass
------------------------------------------------------------
}}}