#acl merlyn:read,write All:read
= H3C Switch how to =
<<TableOfContents()>>
== Create vlan ==
 * Create VLAN-interface2.

{{{#!highlight python
<Sysname> system-view

[Sysname] vlan 2

[Sysname-vlan2] quit

[Sysname] interface vlan-interface 2

[Sysname-Vlan-interface2]

[Sysname] display vlan 2
}}}

== Port access vlan ==
 * Add port GigabitEthernet 1/0/2 to VLAN 3.
{{{#!highlight python
 <Sysname> system-view

 [Sysname] interface GigabitEthernet 1/0/2

 [Sysname-GigabitEthernet 1/0/2] port access vlan 3
}}}

==  Port Trunk permit vlan ==
 * Add the Trunk port GigabitEthernet1/0/4 to VLAN 2, VLAN 4, and the range of VLANs from VLAN 50 to VLAN 100 (these VLANs all exist).

{{{#!highlight python
<Sysname> system-view

[Sysname] interface GigabitEthernet1/0/4

[Sysname-GigabitEthernet1/0/4] port link-type trunk

[Sysname-GigabitEthernet1/0/4] port trunk permit vlan 2 4 50 to 100

Please wait........... Done.
}}}

== How to enable SSH on H3C ==
{{{
ssh server enable
public local create rsa

local-user sshuser

password simple abc

service-type ssh

authorization-attribute level 3
}}}